PMT E-FIRE 10x3 for the Ausom DT1 Pro
Fits — direct fit for Ausom DT1 Pro

PMT E-FIRE 10x3 for the Ausom DT1 Pro

PMT E-Fire 10x3
35 reviews
Upgrade the Ausom DT1 Pro with PMT E-Fire 10x3 tires for premium street grip, predictable cornering, and improved road feel. The DT1 Pro uses a 10 x 3 tire platform, making the E-Fire a straightforward performance tire choice.
$90.00 $80.00 Save $10.00
In stock, ready to ship
Tire size: 10 x 3 (R6.0)
Performance Upgrade

Why Choose PMT for Your Ausom DT1 Pro?

The DT1 Pro already uses a wide 10 x 3 tire platform, so upgrading to the PMT E-Fire is primarily about tire quality and handling rather than changing tire size. The E-Fire is aimed at riders who want stronger street grip, more predictable cornering, and a more premium road feel from their scooter.

GripMore confidence when accelerating, braking and cornering.
HandlingA more predictable, planted feel through turns.
Road feelA more performance-focused connection to the pavement.
Fitment confirmed

Does this PMT tire fit the Ausom DT1 Pro?

Here’s the important fitment information before you order.

Fits — direct fit
PMT tire size10 x 3 (R6.0)
Factory tire setup
The Ausom DT1 Pro uses a 10 x 3 outer tire with a 10 x 2 inner tube.

What to know before ordering

Yes. The PMT E-FIRE 10x3 matches the Ausom DT1 Pro’s factory 10x3 outer tire size. Ausom specifies a 10x3 outer tire with a 10x2 inner tube, so the PMT is a direct outer-tire replacement on the stock wheel.
Installation

Installation on the Ausom DT1 Pro

Know what to expect before the wheel comes off.

01Remove the wheel

Support the scooter safely and remove the wheel using the correct procedure for your model.

02Match the wheel setup

Follow the scooter’s existing tubed or tubeless configuration.

03Mount the PMT tire

Seat the tire carefully and inspect the valve, tube, bead and surrounding components.

04Check before riding

Spin the wheel by hand and confirm full clearance before the first ride.

Model-specific notes

The Ausom DT1 Pro uses an inner tube. Remove the wheel according to the scooter’s wheel design and install the PMT E-Fire with the correctly sized tube. Add a small amount of air to the tube before final assembly so it sits naturally inside the tire and is less likely to become pinched. Confirm the valve is positioned correctly, then inspect brake, fender, swingarm, and cable clearance before riding.

Important: Do not ride until the tire spins freely and all surrounding clearances have been checked.
Why PMT feels different

Stock tire vs. PMT performance tire

A factory tire can be perfectly adequate. PMT is for riders who want a more performance-focused connection to the road.

Typical stock tire
GripBuilt for broad factory needs
CorneringGeneral-purpose handling
Road feelBalanced for everyday use
Best forStandard replacement needs
PMT
Performance tire
GripPerformance-focused road grip
CorneringMore confidence-focused feel
Road feelMore connected feedback
Best forRiders prioritizing handling and grip
Premium road performance

Why choose PMT?

PMT is for riders who care about how their scooter feels on the road—not simply the lowest-cost replacement tire.

↗
GripMore confidence when the scooter is working hard.
⌁
CorneringA more performance-focused feel through turns.
≈
Road feelA stronger connection between scooter and pavement.
◎
ControlFeedback for riders who want more from their tire.
Real rider feedback

What riders say about PMT E-Fire 10x3

These reviews belong to the actual PMT product shown on this page.

Customer Reviews

Based on 35 reviews
97%
(34)
0%
(0)
3%
(1)
0%
(0)
0%
(0)
97.1
100.0
J
Jesse Sanchez
PRO TIRES

TOP OF THE LINE PRODUCT NO DOUBT

O
Oleksandr

VERY VERY GOOD QUALITY TIRE thsi tire is like michein in scooter world

H
HikerToo
Good sticky tires

Have used PMT's for a few seasons now, first on Apollo Phantom, now on KAABO Mantis King, just like any tire, the softer grippier it is, the faster it wears out, but if they save one slide-out they're worth their price.

M
Matthew

Amazing tires for my Vsett 10+. Great price and fast shipping!

R
Rafael Angeles
So good PMT tire

Rydology is the best i can't tell people enough about the company! This tires are amazing just like Rydology s customer service! Brent is the man ! Thank you again for my refund! 🙏

123
PMT E-Fire 10x3
Fits — direct fit for Ausom DT1 Pro

PMT E-Fire 10x3

Premium PMT tire for your Ausom DT1 Pro.

$80.00
In stock, ready to ship
Questions before you order?

PMT tire FAQ for the Ausom DT1 Pro

Fitment, installation and product questions—answered in one place.

Q: Does the PMT E-Fire 10x3 fit the Ausom DT1 Pro?
A: Yes. The DT1 Pro uses a 10 x 3 tire platform.

Q: What size tire does the Ausom DT1 Pro use?
A: It uses a 10 x 3 outer tire.

Q: Does the DT1 Pro use an inner tube?
A: Yes. The factory specification includes an inner tube.

Q: Is the PMT the same nominal tire size as stock?
A: Yes. Both are in the 10 x 3 tire class.

Q: Why upgrade if the size is already the same?
A: The upgrade is primarily about the PMT tire’s performance-oriented road characteristics rather than increasing tire size.

Still unsure?Contact Rydology and we’ll help confirm fitment before you order.