Nanrobot LS7+ / N6 72V NFC Display

Center display for either the Nanrobot LS7+ 72V or the N6 72V with NFC

Part comes with the mount for the LS7+. For use on the N6, you will need to use the original N6 mount and screw it into the display. 

***As of November 2024 the N6 72V/ LS7 72V Display was changed to 4 wires and the throttle to 1 wire. If you buy a new display but use an old throttle, just connect 1 wire of the throttle to the display, leave the other wire empty, and connect the remaining 3 instrument wires to the wiring harness.